Store Home   Forum Home   Help & Contact Info   Bank & Payment Details   DIY Go Kart Plans


BPDC01 BKHC02 Brake System Pad Replacement Guide

Moderator: Specialists

BPDC01 BKHC02 Brake System Pad Replacement Guide

Postby cutpriceracing » Thu May 15, 2014 2:29 am

The BKHC02 brake system is designed for light duty applications (kids recreational go karts, buggies, or other lightweight projects, or projects where braking is rarely used).

Replacing the pads is an easy job with a couple of small tricks required to complete quickly.

BKHC02-(2).jpg
BKHC02-(2).jpg (14.39 KiB) Viewed 1874 times

Remove the calliper from your vehicle. Place on a bench with the bleed nipple facing downwards as shown.

BKHC02-(3).jpg
BKHC02-(3).jpg (18.37 KiB) Viewed 1874 times

Push the large black bracket with the two holes and pins back toward the rear of the calliper until the pad attached to the other black bracket is sitting right at the end of the pins, then push the top of that bracketted pad towards the rear of the calliper and wiggle it over the pins until removed. Sometimes it's tricky, but a bit of practice will get you there.

BKHC02-(4).jpg
BKHC02-(4).jpg (22.32 KiB) Viewed 1874 times

Remove the rear pad (small pad)

BKHC02-(1).jpg
BKHC02-(1).jpg (17.66 KiB) Viewed 1874 times

Remove the metal spring, clean.

Replace pads in reverse order as shown.
cutpriceracing
Site Admin
 
Posts: 132
Joined: Fri Sep 14, 2012 6:50 am

Return to Chassis Assembly & Tuning

Who is online

Users browsing this forum: No registered users and 1 guest

cron