Home :: CPR KARTBEAT NEWS

CPR KARTBEAT NEWS

CPR KARTBEAT NEWS

 SUBSCRIBE to our newsletter - click here

 
Logo


HappyNewYear
PaulsFaceJANUARY CPR KART-BEAT NEWS 

 Hi there!

Welcome to the Happy New Year January 2018 edition of CPR Kart-Beat News.  It's a new year and we've got a whole lot of new stuff for you in 2018!.  As always, this issue we'll fill you in on what's been happening here - read on and find out what's in store this month!

IT'S ALL NEW THIS YEAR!  - 2018 PRODUCT RANGE EXTENSION

This year, we've decided to start it with a BANG!  Yep, we've got two incredible new engine packages, one of which supports the brand new 4SS Karting Australia class that lets you run your 4-stroke on any KA track nationally!  Cool right?  We've got the new engines, and all the accessories in stock ready to ship.  But we're not all about KA, as you already may know we're supporting those who offer a low cost solution for racing, and we've also got a brand new electric start high horsepower 2-stroke engine package available right now - read on if you're keen on that one, you'll be amazed how low the price is on that kit!  The fun doesn't stop there though, we've got loads more new stuff - scroll down through our newsletter to find it all, and remember to jump on our site today for all the best parts at the best prices while enjoying our well-known super-fast service!

 

CHECK OUT WHAT EVERYONE'S BEEN DOING WITH CPR PARTS!

 

There's just so much going on out there with CPR parts - not only are they used to keep race karts in their prime - jettisoning their drivers to the front of battle packs, but we've also got some creative customers out there building some crazy crazy stuff!  Yep, just like the project below by Jason Gislingham - scroll down to the bottom of the page to see more of his outrageous build!

 

 

WE'VE FOUND A NEW WAY TO GO RACING SOONER!  - 2018 V8SCOPS SERIES

HappyNewYear

We've been supporting motor racing enthusiasts since 2005 with a range of products that enable easier entry into the traditionally expensive sport so that they can enjoy racing much sooner than expected.  With same day dispatch and fast free delivery CPR is the most convenient way to buy Kart & Sim Parts no matter where you are in Australia.  Impressive technological advantages over the last few years have paved the way for a highly professional online motorsport arena which provides an intensely competitive real-world alternative for drivers who prefer not to fund expensive real-world racing, or want to keep their skills in peak condition when not at the track.

That's why in 2018 CPR Kart & Sim Parts will proudly co-sponsor the most successful online Sim Racing league, OSR, to help bring the premier online V8 Supercar series V8SCOPS to a wider audience with live youtube and facebook broadcasts by V8SONLINE.  

 

HOW EXCITING ARE THESE FINISHES!!!

 

Chosen for its highly professional V8SCOPS series with incredible clean and fair racing, the league is accessible by anyone with a PC and an iRacing subscription and showcases the most talented drivers.  V8SCOPS removes financial and political advantages by ensuring vehicles are 100% mechanically identical and drivers adhere to the strict race etiquette via live marshalling, adding an even more affordable level to CPR Kart & Sim Parts goal of helping motor sport enthusiasts go racing sooner.  CPR Kart & Sim Parts believes that the winning combination of V8SCOPS, V8SONLINE and iRacing will be the future of affordable motorsport through its ultra-realistic motorsport simulation and a strong community of drivers including some well-known real-life V8SUPERCAR drivers.  

Over the coming months we'll be introducing you to the new range of sim products available to improve your immersion and experience an exciting new motorsport revolution.

If you're interested in getting involved, click the V8SCOPS trophy picture above to find out how to sign up and start your career!

We can't wait to see you out there on the track in 2018!



NEW SIMULATOR COCKPIT!

 

RPMChassis


NEW!  RPM Club Race Simulator Chassis!

If you're looking for a cool way to keep up-to-speed in the off-season over Christmas this year, maybe it's time to get that sim-racing software back out and hook up your steering wheel and pedals to our brand new RPM-Club sim chassis?

We're proud to announce our new distributor agreement with RPM (Real Parity Motorsport) to offer you the impressive new range of RPM Club Racing Chassis.

These are the EASIEST chassis to assemble - they take around 10-15 minutes to put together - THAT'S FAST!

MODULAR SYSTEM STARTING FROM $329 DELIVERED!
RPM Club Chassis modular system allows you to buy your simulator chassis without a screen mount then add one later.  Or you can buy it complete with the adjustable 1 to 3 screen mount straight away and enjoy the view!

- Base unit without screen mount is perfect for the lounge room.
- Screen mount provides single or 3-screen mounting options.
 
FULLY ADJUSTABLE
With a dazzling array of adjustments, the RPM Club chassis can be manipulated to suit almost any driver for a comfortable and immersive experience.

- Fully adjustable seat back/forwards & backrest angle.
- Steering wheel height and screen height (with optional screen mounts).
- Chassis length & pedal height/angle adjustment.
 
EXTREME STRENGTH AND RIGIDITY
Our RPM Club series chassis has been engineered to provide premium grade strength and rigidity.  Quality powder-coated components provide extended life and ensure your chassis gives you years of trouble free operation and excitement.

- 35mm Square Tubing for Super-High rigidity.
- High tensile locking bolts reduce loosening from vibration.
- Flaw-less black powder-coating for premium rust resistance.
-  Strong enough to accommodate high-torque & direct drive steering wheels.
 
COMPATIBLE
*STEERING WHEEL FOR ILLUSTRATION ONLY - NO ELECTRONICS INCLUDED IN THIS KIT

Designed for use with popular steering wheel, pedal and shifter packages so you can get racing right-away!

- Pre-drilled ready for Logitech G25, G27 & G29.
 
 
FAST AND EASY TO SET UP!
Our RPM Club series chassis has been carefully planned so that it’s fast and easy to assemble.  The Club TV model takes around 10-15 minutes to assemble making it a breeze to set up – start racing sooner!

- Simple slot & lock system used on the entire frame is fast and easy.
- Only requires a 10mm and 13mm spanner – all other tools included.
- Solid double-bolt locking system improves rigidity and strength.
 
COMPACT SIZE WITH FOLDING SEAT
The super-small footprint of our chassis means you can stow it away easily then slide it back out ready for racing action!

- Footprint 90cm Long x 51cm Wide with pedal base removed.

 

RPMChassis

 

 

 

Facebook

 

 

 

NEW FASTER DELIVERY!

FasterDelivery

WE WANT YOU TO GET YOUR ORDERS EVEN FASTER!

We know you love our super fast despatch and quick courier deliveries, because you've been telling us!  And we're proud to know we're doing a great job.  So nothing's changed with our courier deliveries - you'll still get them really fast!

But what if your order is a small order - typically less than 500g and thinner than 20mm?

All letter orders upgraded to PRIORITY LETTER FREE! - When we ship your order, it is shipped either by our super-fast couriers, or by the Aus Post Letter system.  Items that are thinner than 20mm and weigh less than 500g are usually shipped in a letter to ensure you get a really low price. 

Recently Aus Post decided to hold back all letters for approximately 3 days, which adds to the time you have to wait for your items.  We'ved decided that's simply not good enough, so we're upgrading all letter orders to PRIORITY service for FREE!  That's right, we're paying extra for you to get your stuff fastter!

So no matter what you order, you can rest assured we take getting it to you quickly, and you'll see your order even faster!
!

 

 

We've increased our range of Guides, and made them more current! 

 

This month we've made it loads easier to find our guides, with links both in our well-known drop down menu in the black bar that runs across the top of the screen, as well as in the Help section so that everyone can access them - including those of you using mobile devices.  Not only that, but we've ensured that all the new guides will show immediately so you'll have access to the freshest and newest guides all the time - all you need to do is visit the site and browse through the guides sectoin!  But wait, there's more!  Yep, we've done even more work on our guides - we've re-organised them so that they're easier to find - so why don't you shoot over to the store and check them out today?

Guides_Help


 

 

 

PaulsFace  We've just received HEAPS OF NEW PRODUCTS! 

 

This month we've also received a bucket-load of brand new products, so if you want to be in-the-know, make sure you're receiving our emails - we've sprinkled them through our email below so remember to take the time to browse through so you don't miss anything!


 

NEW 4SS Karting Australia Engine! KA LEGAL 4-STROKE!

Torini Engine

The NEW 4SS Legal 212cc 9.9hp Race engine from Torini Is HERE!

Have you been hankering for some road circuit action but really love the low cost and ease of use of the reliable 4-stroke race engines?  

Are you excited about going racing but lack the big budget required for competitive 2-stroke Karting Australia competition?

WAIT NO MORE!  Racing costs will be drastically reduced with the new Torini CLUBMAXX engine, available and in stock right now!  

GO RACING THIS YEAR ON ALL THE KARTING AUSTRALIA TRACKS NATIONALLY with the Homologated 9.9hp Torini Clubmaxx engine.

Click the picture above to get yours today!

 

 

 

 

NEW 18hp Electric Start Engine Turn-key PACK! Race you're KT100S mates!

PRD Engine

Do you have a Yamaha Clubman KT100S and are you sick of having to chase down a start and/or starter every time you spin and stall?

Wouldn't you rather just press a button and go?

Unfortunately to upgrade a non electric start KT100S to electric start involves changing pretty much every single component bar the piston and conrod, so it's not economical to do so.

BUT YOU COULD BUY THE PRD INSTEAD!

Yep, our PRD RK100 kits produce approximately the same HP as the KT100S, so these little fellas will be bang on for close racing with your mates!

BRAND NEW.
 
We've received a scoop purchase of these super-reliable, low cost high quality engines - they're cheap because they were a clearance deal!  You get awesome power in a complete electric start package - turnkey, with everything from muffler through to starter button and battery included!  Even a clutch is included and fitted to the unit!  AMAZING VALUE.
 
This 18hp engine is comparable to the KT100S and can be raced against it quite evenly.
 
If you've got a non-electric start KT100S and want to race the guys with an electric start model, this is the perfect way to do it!  A purpose built race engine - not a suped up pump motor!
 
Perfect for the local track, recreation, or the backyard speedway!
Capacity 98cc
Horse Power 18HP
Restricted Horse Power N/A
Bore 49.92mm
Stroke 50.00mm
Piston Aluminium
Ring Type Dykes
Cooling System Air Cooled
Radiator N/A
Air Admission Piston Port
Reed Petals N/A
Reed Manifold N/A
Head Volume 10cc
Conrod Forged 100mm Medium
Ignition PRD #7 Magneto
Spark Plug Cap PRD Resistor
Carburettor Walbro WB42 W/Choke
Exhaust Straight Coned / Adjustable Length
Starting System Electric Start
Drive System Centrifugal Steel Clutch
Airbox Silver 23mm
Air Filter Internal Filter
Battery Yuasa
Cylinder Liner Cast Iron
Ports Cast
Power Valve N/A
 
 
Included in the kit Engine
 
Carburettor
 
Carburettor Spacer Block
 
Carburettor Spacer Gaskets
 
Airbox
 
Airbox Adaptor
 
Air Filter Red Short
 
Airbox Clamp
 
Spark Plug
 
Exhaust Gasket
 
Exhaust Header
 
Exhaust Flex Spacer
 
Exhaust Flex Sealer
 
Exhaust Springs
 
Exhaust Muffler
 
Wire Loom
 
Starter Button
 
Off Button
 
Switch Bracket
 
Battery Bracket

Click the picture above to get yours today!

 

 

 

 

 

Facebook

 

 

 

 

 

 

NEW G-DRIVE 219P COMPETITION CHAINS WITH JOINERS!

 

G-Drive Chains

 

Testimonial

 

 

 

JOINER LINKS WITH 219P RACE GRADE CHAIN?!  YES!  ABSOLUTELY YES!

Have you been hunting for 219P chain with a joiner link?  Because up until now, you'd be right out of luck.  Except that CPR Kart Parts have stumbled upon something we think you'll find the best thing since sliced bread!

Yep, our new G-DRIVE series of CPR chains - 219P with a Joiner Link!  Yes, we're not kidding - they're supplied with a joiner link!

Just look for the yellow G-DRIVE logo in the chain section.

CPR G-Drive chain is a revolutionary new gold-link chain designed for optimum strength for racing while maintaining incredible convenience by employing the first race-grade joiner link available to kart racers globally.

If you're looking for a chain with maximum strength and durability, but at the same time need the convenience of a built-in joiner link for in-board use, then G-Drive chain is the perfect partner for your race kart.

G-Drive chain has been designed and manufactured to exacting standards utlising cutting edge manufacturing methods, as well as state of the art machinery to ensure the highest reliablity.

Heat treatment: G-Drive chain ensures the highest strength and reliability through the use of technically advanced heat application to provide high quality mating surfances where rollers and bushes inter-act.

Shot peened parts: All plates and rollers are shot peened to iprovide the absolute high resistance against fatigue and impact loading.

Preloading of the chain: Elongation and fatique are considerably reduced by the use of this advanced techinque.

These are the only race-grade chains with a joiner link available in Australia and you can get yours today by clicking the ad above.

 

 

 

 

 

 

BACK IN STOCK LONG & SHORT SHAFT KT100 CLUTCHES

KT100Clutch

Testimonial

BACK IN STOCK - Long shaft & Short Shaft KT100 Red Clutch

Our hugely popular (and extremely cost effective) Red Clutches are now back in stock. Designed to suit Clubman (KT100S) and National (KT100J) engines, these packs are complete and come with sprocket and chain so you've got everything you need for a complete transmission!
You'll need to select the right length crankshaft type clutch though.

Not sure whether you've got a long shaft or a short shaft? Easy, learn just how simple it is to tell which one you have by clicking the guide link here:

Testimonial

 

You'll want to be quick though, these things are in huge demand right now and we've got limited stocks available.  Click the picture of the clutches above to browse our range.

 

 

 

LOW PRICED KT100S IGNITIONS!

KT100SIgnition

 

Testimonial

 

 

KT100S REPLACEMENT IGNITION FOR ALMOST FREE!

Need a new ignition for your KT100S but don't want to pay through the nose?

Our new modules are insanely inexpensive - offering a quick resolution to loss of spark, at a price that you'll be grinning from ear to ear.

You can get yours today here: 
http://www.cutpriceracing.com.au/store/Ignition-Assembly-suit-KT100S/

 


 

NEW TWIN-DRIVE - EASY 2 STROKE CONVERSION TORQUE CONVERTER KITS

 

Twin Drive Torque Conerter

Product Reviews

 

STRUGGLING WITH BURNT OUT CLUTCHES ON YOUR FOUR STROKE?

WANT TO CONVERT TO 4-STROKE WITHOUT CUTTING UP YOUR FRAME?

We've got the solution for you, and it's in stock and ready to ship!

You're looking at the new TWIN DRIVE torque converter system - this incredible piece of equipment works like an automatic gearbox for your 3/4" straight shaft 4-stroke engine, or 1" straight shaft 4-stroke engine.

Plus, our Twin-Drive system runs an inboard sprocket as well as an outboard sprocket - so you can mount it on a 4-stroke engine on a 2-stroke chassis and use the original rear axle sprocket location!  NO MODS NEEDED!  IT'S THAT EASY!

Starting with a 2.7:1 reduction, it's like having a rear axle sprocket almost 3x the size!  So if you're running a 70T and you need it to be bigger but don't have any ground clearance left, then this guy will allow you to run a 60T that feels like a 120T!!!

And it get's better, because you'll get a 10% overdrive too!

Not only will you get BLISTERING ACCELLERATION from your base level engine, but you'll also get 10% more top speed from the exact same gear ratio!  UNBELIVABLE!

Want to know more?  Check out our install guide (note: our install guide does not show the Twin Drive system, but you can see from the picture below that the twin-drive system includes another sprocket on the back of the unit - see middle left of the picture below).

Install guide: http://www.cutpriceracing.com.au/store/Guide-Torque-Converter-Installation/

Learn more about the differences between dry clutches and torque converters, and why you might benefit from a torque converter in our guide - click this link:http://cutpriceracing.com.au/phpbb3/viewtopic.php?f=14&t=807)

Or click the picture above to get yours today!

 

 

 

 

 

BACK IN STOCK NEW MODEL 13" OFF-ROAD WHEEL SET

Testimonial

These are the ticket to fun - the fast way!  If you're building a project, these make life so simple - just use our standard range of kart parts or any used kart and bolt them on!  It really couldn't be easier!  

Plus they can be installed on any standard race kart by simply removing the existing wheels and bolting these guys on!  Yep, you can put them on for off-road fun, and remove them when you want to go racing!  How good is that?!

They suit standard 17mm stub shafts and standard race pcd rear hubs found on all race karts.  Hurry though, at this price they never seem to last long in our warehouse.  Click the picture above to learn more about these awesome wheels and order yours today!

 

 

 

 

 

 

 

 

 

 

NEW 1" & 3/4" 20HP+ Clutches 20HP+ Extreme Performance 4-Stroke Clutches (3/4" and 1" Models available)

BullyClutch

Testimonial

FHUGE POWER 20+ HP CAPABLE IMPRESSIVE BULLY 3 & 4-DISC CLUTCH NOW IN STOCK

3/4" AND 1" MODELS AVAILABLE!!

You've probably heard about the Bully clutch and just how incredible it's power handling is - but not only that, with 3 and 4 discs being used to transmit that power to the wheels, the Bully clutch out-performs EVERY OTHER CLUTCH on the market right now!

Are you looking to go beyond the pinacle in performance to give you the best advantage out on the track? Do you want to win races, rather than spending time mid-field? Then the BULLY is the clutch that will take you there!

Disc-Type Competition Clutch suit High Performance 4-stroke engines.

Suits Standard 19mm Drive Shaft (3/4") as used on most 6.5hp engines

OR get the 1" model which suits Standard 25.4mm Drive Shaft (1") as used on most 9hp+ engines.

Fully adjustable engagement from ~2000rpm through to 5600rpm. No springs required - easy to adjust. This clutch will not only outlast other clutches when coupled with a high-rpm 4-stroke engine revving upwards of 8500rpm but it will also provide easy and convenient adjustment of engagement speed so that you can match the torque curve of your engine - allowing faster exits from turns.

Complete unit with Drum and Clutch and CARRY CASE!

All Individual components available from CPR so if you break something, you can just buy the bit that breaks rather than replacing the entire clutch!

Outer diameter of the housing is 100mm
In stationary state the depth including levers is 71mm (measured from the outer extent of the inner shaft on the drive sprocket side of the clutch to the farthest point on the levers)

The levers will protrude approximately an additional 7mm at high rpm. It is recommended to leave at least 10mm free space between the levers and your seat, 15mm+ is better and shroud your seat with alloy plate as a safety precaution.

View the 3/4" model user manual / maintenance / Engagement Speed guide here: http://www.cutpriceracing.com.au/store/Bully-Setup-34/

View the 1" model user manual / maintenance / Engagement Speed guide here: http://www.cutpriceracing.com.au/store/Bully-Clutch-Setup-1-Inch/

You can get the 12T #35 3/4" (19.05mm) kit here: http://www.cutpriceracing.com.au/store/Bully-Pro-Competition-35-12-34-Clutch/

You can get the 14T #35 1" (25.4mm) kit here: http://www.cutpriceracing.com.au/store/BULLY-Pro-Competition-35-14T-4-Disc-6-Spring-Fully-Adjustable-25-4mm-1-bore/

 

 

 

 

NEW HEEL BLOCKS Kids Pedal Extenders & Feet Raisers

Testimonial

KIDS STRUGGLING TO REACH THE PEDALS?

If your little ones are having trouble with the stock height or distance pedals, our pedal extension and brand new heel stop blocks will get them where they need to be.

Our precision CNC Billet pedal extensions are the best on the market, offering several positions for growing kids - start them on the longest extension and move them away as required as they grow. They're easy to install and offer loads of positions as well as the ability to easily swivel out of the way if a taller driver needs to fit.

Usually blocks are required to assist with the smaller foot length being able to reach the stock pedal height. Our new heel stop raising blocks are the perfect compliment to a new set of pedal extensions and will get smaller drivers feet up where they need them to operate the pedals.

You can find our pedal extensions here:
http://www.cutpriceracing.com.au/store/Pedal-Extension-Pair-for-Pedals-Long/

And our heel stop raising blocks here: http://www.cutpriceracing.com.au/store/Heel-Stop-Raiser-Blocks-Pair/

 

 

NEW SPRINGS Full Range In Stock

Springs

 

NEW!  FULL RANGE OF SPRINGS!

You probably didn't know we carry a full range of muffler springs in stock, as well as loads of other springs for throttle return, pedal return and more…  Mostly because we've been keeping a bit quiet about it.

Just like these awesome quick release springs, which you can get here:
http://www.cutpriceracing.com.au/store/Muffler-Exhaust-Cradle-Spring-90mm/

Or if you're after something a little different, check out the rest of our range by clicking this link:
http://www.cutpriceracing.com.au/store/Springs/

 

 

 

 

NEW DAILY SPECIALS on our WEBSITE!

Our new Daily Specials are the most excisting new buzz around the Cut Price Racing website!  Visit our store daily to ensure you know the day's special and don't miss out on the awesome offers - there aren't any emails sent to remind you so our advice is stop by the store daily and make sure you're in the know to take advantage of the best deals before they run out!

 

 

DailySpecials

 

Facebook

 

 

 

NEW FUEL COMPONENTS TAPS & PUMPS!

 

 

FuelLine3mKit

 

Testimonial

 

 

 

GENUINE CPR Fuel Pump Rebuild Kits now in stock!

Our CPR fuel pumps are a fantastic high pressure pump giving great results to plenty of thrilled karters nationally, and at this price there's no wonder why - designed with sturdy metal construction they provide a rugged base for ensuring your performance 4 stroke engine get's all the fuel it needs to perform.

You can get one here: http://www.cutpriceracing.com.au/store/External-Fuel-Pump-Upgrade-for-4-Stroke-Engines/

And if you're wondering how long it will last - then the answer is an extremely long time, especially when you can buy one of our Genuine CPR fuel pump rebuild kits! Yep, we've got complete kits in stock ready to go. Solve leaks, air leaks, performance problems, and other running issues by installing a new set of gaskets, springs and seals.

You can get our rebuild kit here: http://www.cutpriceracing.com.au/store/Gasket-Set-Genuine-CPR-Suits-Fuel-Pump-FPEC01/

But it's not all about GOING, sometimes you need to STOP the fuel - and we can help you there with our premium quality anodised fuel taps now in stock! Simple to install and a basic but reliable on/off tap - they also look great on your kart!

Need a fuel tap right now? Get one delivered quickly by grabbing one here: http://www.cutpriceracing.com.au/store/Line-and-Filters/

 

 

NEW GX200 BUDGET PERFORMANCE FLYWHEEL

Flywheel

Testimonial

 

 

Are you desperately trying to find a solution to flywheel rulings restricting you to an alloy flywheel and banning the stock cast-iron flywheel?  We know that's a big expense, which is why we've sourced a brand new option for those of you wanting to save a few dollars on your engine, but still remain exceptionally reliable and competitive.  

Our new PVL model has just arrived and you can get one today - designed for the GX200 this model will get you complied and out there racing, for a much lower price than our full CNC model!

 

Want a quick link?  You can find them here:

GX200 PVL Budget Flywheel

GX200 GX200Flywheel

GX390 GX390Flywheel

Facebook

 


NEW Gold/Gold RLV Competition 219P 2-Stroke Chains

219RLV

Testimonial

Designed for 2 stroke go karts.


NEW RLV Performance Chain in 219P

STRETCHING 2-Stroke CHAINS AT THE RACETRACK?

Suffer no longer, with premium race chains from RLV. These chains solve all stretching problems, with the top-of-the-line and most popular gold-on-gold chain offering outstanding reliability and resistance to stretching.

You've already heard how popular our RLV #35 chain is, well now you can get it for your 2-stroke engine too!

If you're looking for the best of the best, you need an RLV chain.

You can get yours today by clicking the above!

 

 

 

We're making it easier to find our NEW PRODUCTS!

 

Our customers are constantly asking 'what's new?' so we've decided to make it even easier to find out by placing our 3 latest new products at the top of our website so you can easily see what's arrived each day!

Simply click the picture below to head over to our website and have a look!

NewProducts

 

 

 

 

NewProducts

 

 

 

 

 

 

Facebook

 

 

 

 

NEW MAG STYLE 3-SPOKE BOLT-ON ALLOY RIM SETS

RFBC07

 

 

Testimonial

 

 

 

Our popular 3-spoke mag-style alloy BLACK rims are back in stock, but they won't be here for long, because even though we order double the quantity every container we still can't hang onto them for very long at all!  They're usually sold out within weeks, so don't wait until someone else is showing off their flashy set at your track - BE THE ONE with a set.  At this price, why not do it today?!

NOW AVAILABLE IN 3-BOLT 130mm OPTION!
With our new 3-Bolt 130mm front wheel option, our black premium Alloy spoked wheel sets offer new solutions for karts using front hubs, and Midget/Rookie karts.

Check them out by clicking the ad above now! 

 

 

 

NEW MODEL AKA LEGAL PLATES AND NUMBERS

NumbersDecalsTestimonial

Get RACE READY with our plate & decal kits and our number kits.   These new model sets contain a rear bumper decal, Sidepod backing decals, Nassau backing detail in Yellow or White, 4x Sidepod numbers (2x 2 Digit Number), 4x Front & Rear numbers (2x 2 Digit Number) in either Red or Black OR 8x Large numbers for classes that require large numbers only.

 

 

 

 

 

 

 

We're doing more back-in stock updates and super-specials on Facebook!

 

If you're using Facebook, we're updating our page daily so that you'll always know when new stock arrives, or out-of-stock items come back into stock!  Make sure you like the page and posts to stay up-to-date and ensure you aren't missing out on any of our special offers!

 

Facebook

 

 

 

Our Trading Hours Have Changed.

 

Part of the process of reducing costs for you so that we can offer our impressive range of parts at the absolute lowest price has been to identify where we can make changes in our distribution system.  One of the places we knew we could look at our high costings was our warehouse so we've decided to take more control over that area and run it 4 days a week instead of 5.  Becuase we send barely any orders on Fridays we've decided to cut that cost and pass it onto you in the form of low prices.

We will now be open from Monday to Thursday which means we'll dispatch all orders paid up until 2pm on Thursday that day so you can have them by the end of the week.  

Remember even though we won't send orders out on Friday, the couriers will still deliver your items on the Friday of each week if you've ordered on Thusday!

 

 

NEW PREMIUM RACE WHEEL BEARINGS

WheelBearings

Testimonial

 

17mm ID WHEEL BEARINGS AT THE RIGHT PRICE

You can always count on the best value at CPR and our wheel bearings are no different. In packs of 4 for just $14.95 delivered, there's no excuse for running worn out wheel bearings.

You can choose between sealed and low friction, from our premium range as well as our European brands.

So stop putting off that job - make your kart safe again and replace those tired bearings sooner rather than later.

You can get your set by clicking the picture above.


 

BACK IN STOCK 420 Pitch Cluch, Chains & Sprockets

Testimonial

 

If you're building an off-road kart then 420P is quite appealing.  It's strong, heavy duty, and can handle heavy loads and high power.  Our 420P range is designed to interface with standard race-kart componentry so our sprockets will fit existing kart sprocket hubs.

Clutches are also available in 1" and 3/4" options so we'll have something in our range to suit your application.  Coupled with our popular torque converters (see the top of this email) they make a fantastic practical off-road solution.

Click the picture above to browse our range.

 

 

 

 

 

 

Get yours today - simply click the picture above and we'll take you right to them!

 

 

We're making it easier to check when products are BACK IN STOCK!

 

If you're one of the unfortunate few customers who find that we're out of stock of something (and it doesn't happen very often) then you're in for a fantastic surprise this month!  We've made it so much easier to check if your item has come back into stock - at the bottom of our home page you'll find our new "back in stock" section which shows the latest products to arrive back in stock. 

Simply click the picture below to head over to our website and have a look!

BackInStock

 

Facebook


 

We're delivering excitement with speed!

And don't forget, anything you buy this month (or any month actually) will be sent the same day as long as you've paid by 2pm EST!  (excludes Fridays, Weekends and public holidays) - and FREE of charge when you buy through our online store www.cutpriceracing.com.au

 

 

 

 

We're finding ways to keep your parts prices lower!

 

You already know CPR is all about providing the best product at the best price but did you know how hard we've been working behind the scenes to keep your prices low?  We've been making some big changes to the costings in our business so that we can keep your pricing low!  You can find out more by scrolling down.


Facebook

 

 

 

 

 

We're helping you install your parts!

Our new product install manuals have just been released.  If you've bought a product from our range you'll have instant access to our full range of manuals.  We're updating them constantly and adding new ones weekly so you can rest assured your new products will be easy to install and we've got you covered! 

Download your Install Manual

 

 

We've got a whole new month of exciting specials in store!

And of course we're still giving things away, but only if you buy directly from our online store - not eBay or over phone.  So if you're looking to score yourself some free stuff jump online and place your order today.  

 

 

FreeGiftVoucher

 

If you're in the mood to document your installation of either the 10hp kit, or any other of our products (it can be as small as a pedal set - you don't have to write a guide on a complete kit) why not pick yourself up a free $25 gift voucher for the trouble of writing it down and taking a few pictures?  Yep that's right we're giving you a $25 gift voucher just for showing us how you put something together - what a deal hey!

So if you're keen to receive your gift voucher, shoot over to our forum and post your install guide - click here to learn more:  http://www.cutpriceracing.com.au/phpbb3/viewtopic.php?f=37&t=921

 

PROJECT JASON'S CRAZY QUAD BIKE


 

 

G'day fellow builders!

I'm Jason and this is my 70's Mini Bike inspired Dirt track Quad.

It all started with me having gander at some old school Mini Bikes on the Net. I've always thought it would be cool to have one, but after seeing how much the kits cost that was the end of that! Anyway I came across the Scratch build Grasshopper ATV plan for $15. So I downloaded it and started my project with a trip to Brisbane Metal market for $40 of 25x25x2 steel and started the frame. As I race a 4 stroke dirt kart at Ipswich City Dirt Kart Club, I had a quite a few kart parts that I was able to put into the project to beef it up from what the plan had suggested in places.

The engine came from an old 196cc clone pressure washer the Guy across the road had out for Curbside Collection. So under the cover of darkness I slipped over and grabbed it. So, I pulled it down and rebuilt it with old race parts I had laying around. Flat top piston, a race retired 28mm valve head with a 50 tho shave, 10 thou billet rod and Raceseng S2 Billet flywheel and a set of Raceseng 1:2 roller rockers. At the moment the cam is still stock because my racing ones have the compression release removed. Will be looking to use something with a 275 ish lift in the near future. The carburettor is a self bored (16.5mm) and reworked genuine Honda running e85. It also uses a manifold spacer and a ARC velocity air filter  adaptor. I also decided to go with a Tav2 torque convertor so the gearing covers a wide range for all different riding conditions.

Regarding the rolling Chassis, The rear end is a complete CPR 40mm axle set up with Diy bearing hangers. The rear calipers are from CPR too. The rear shocks are adjustable coil overs from ebay. The rear rims are Edwards Speedway 175mm x  6 inch diameter. The rear tyres are Unilli 225mm x 6 inch. After a long search for ideas regarding what to use for foot pegs, On the net I came across people using wide platform bmx pedals on Harleys. So I took that option and they work great!

The front end is a complete CPR set up, with the swing arm support rods being CPR tie rods and ends too. The front wheels are just cheap Ebay 13x5x6 atm, hoping to upgrade to 6 inch Speedway set up in the future. Both upper and lower camber adjusters are CPR along with all nuts, bolts and washers in the front end. The front shocks are the same as the rear but with a higher spring rate adjusted into them. The front crash bar was inspired by me watching a Rat Rod build show on Telly.

On top of the Chassis I have a 19 inch old school Deltec Mini Bike seat. The fuel tank is a 3 litre one from a motorised push bike. The Handlebars and risers are from Ebay and the head stock is a peice from an old billet engine mount which I cut down. The throttle and brake master cylinder is from Ebay too.

Ok, how does it go???.
At this stage because it really needs a new cam and im going to need to take it somewhere to let it rip properly, I've only covered the categories below.

Standing start wheel stands are covered!
Ripping the top off the lawn with cyclone donuts are covered.
Long Speedway style, getting abit close to the colourbond fence power slides can be ticked off too!

That about covers it I think. I hope you have found my build as interesting as I've found the other builds on this site. Just like all the other builds I cannot thanks Paul enough! The quality, price and service he delivers is what allows me to enjoy my Racing and Projects to the level I do.

 

 

Facebook

 

And remember, we're here to help you get out there racing!

You can always be sure your items will leave the same day you order as long as you've made payment by 2pm that day.  Sure, it's a big claim, but I know shopping online is all about getting it before the weekend race day, and that's why I'm absolutely dedicated to getting our gear out the same day you order.  I believe so strongly that this is a critical component of our business that I've devoted the last two hours of the day to ensuring just that.  Don't be surprised if I can't get to the phone during these times as we're probably flat out!  Just leave me a message and I'll call you back asap. 

I know if you've bought from us before, you've had a great experience.  Nothing's changed with our focus - we still want to help the average Australian race, but we're expanding our range every day so I'd love for you to check out our latest website updates and see if we can help you again, today.  Go on, visit our store at www.CutPriceRacing.com.au - I mean, surely you've got a couple of minutes for fun?

Cheers,

Paul Jones
Managing Director